Silk Road forums
Market => Product requests => Topic started by: nomad bloodbath on July 06, 2011, 03:43 pm
-
We need someone to sell DMT pipes, maybe something similiar to oil burner meth pipes?
Many ppl dont have access to headshops and perfer not to order such things off clearnet headshops.
Otherwise I'll be using an old homemade light bulb vape. >.>
-
What about making "The Machine?" I hear it's smoother than oil pipes.
http://wiki.dmt-nexus.com/w/images/0/09/The_DMT_Handbook_201208.pdf
-
Show me a picture of what you have in mind.
I only ship to europe though.
-
personally, i like to hit the machine. However, when i can't hit one, i just put a screen on my weed pipe and vaporize the powder. Just DON'T touch the flame to it! keep some distance between the powder and the flame, and inhale deep. I have blasted onto another dimension many times by using this method and it works, although id still rather use a machine.
good luck :)!
-
What about injecting it?
-
you can inject the fumarate salt afaik and to the free base
-
I second the request for a DMT pipe!
-
I use a Eclipse Vape, it attaches right to my water bong, minus the water.
big hits
-
"WELCOME TO THE MACHINE
A problem for some true DMT aficionados is the difficulty
involved in effectively delivering large doses—ideally without
leaving one’s lungs feeling like they’ve been coated with
caustic residue. For those who really want to get a 50 mg dose
or more, rather than just burning that much, there is finally
a solution. “The Machine” is an amazingly effective drug delivery
device that I recently test-drove. It is capable of holding
one or many doses, for one person’s repeated use or multiple
users. I was introduced to The Machine by an Australian
friend who, at the 2002 Burning Man, also taught me
about the benefits that can be derived by using mullein when
smoking tryptamines. The expectorant properties of mullein
help clear out the lungs after smoking, and it also permits
deeper inhalations without coughing during smoking. Mullein
is also useful for using 5-MeO-DMT due to additionally
permitting easier eye-balling of doses, via standardization.
The only materials needed to fashion The Machine are a small glass
bottle and a bit of extremely coarse steel wool, as is used for scrubbing
pans. For the bottle, a single-serving Hennessy Cognac bottle works
great, due to its long neck coupled with a handy pre-formed weak spot
in the bottom. After breaking or drilling a small hole in the bottom of
the bottle, a bit of steel wool is rolled into a plug and then pushed into
the neck. Any loose bits inside can be compacted gently by using a probe
inserted through the hole broken in the bottom. This is the finished
device ready to be charged.
To charge The Machine, enough for one or more good doses (the more
the better) is directly applied to the surface of the steel wool at the mouth
of the bottle. The neck of the bottle is then gently heated just enough to
cause the alkaloid to melt into the steel wool plug. If not intended for
immediate use or if intermittent use is desired the cap can be replaced
over the charge to protect it. Freshly applied DMT resin can be prevented
from contacting the cap by placing a small piece of paper between
it and the cap (rolling paper works well for this). The Machine
can also be charged for multiple users by placing a much larger quantity
on the inside of the plug by dropping it through the broken hole.
Charging is done the same way, by gently heating the neck until the
plug absorbs the alkaloid.
To use The Machine, simply point the neck downwards and heat the
steel wool plug from below with a lighter, while slowly inhaling through
the hole made in the bottom. (Take care not to overheat and ignite the
steel wool.) Rotating the bottle while heating will help it volatilize evenly.
The high surface area and heat distribution of the steel wool traps the
liquid alkaloid, both retaining it and driving it into vapor. This trapping
effect also permits the pipe to be simply set down, then picked up
and reheated, as needed.
There is little to no loss with The Machine and for some unknown reason
we have reliably found this pipe to be smoother on the lungs than
many far less efficient devices—particularly the glass “crack” pipes. The
amount of alkaloid that this device is capable of delivering must be experienced
to be believed. The bottle can be reused but the steel wool
should be replaced regularly. While The Machine works with many
materials, extracted Acacia alkaloid is highly recommended. — Justin
Case
Note: Having recently tested The Machine, I give it my highest endorsement.
Previously the “burned plastic” taste and seared lung feelings from smoking a
regular DMT pipe had caused me to abandon smoking as an approach to ingesting
DMT. It was simply too painful and I never got a big enough hit to experience
much effect, frequently coughing out too soon the hit that I did get. For whatever
reason, vapor produced by The Machine wasn’t nearly as rough as that
smoked through a normal DMT pipe. And man, does this pipe deliver a punch!"
-
I can personally vouch for the machine. Very easy to make and a reliable way to hit DMT ...and I'm a complete newbie to DMT - I tried it for the first time a couple of weeks ago and had another go last weekend. The machine had me sorted in no time.
-
I now have a Monday project. :D
-
Oh, nice, got to read it several times to properly understand the procedure, but i think i got it.
The only question for those who tried this already is - how to put a hole in a henessy bottle without the drill (don't have one).. are there any techniques?
Yay, not only will I have a dmt pipe I will be treating myself with some henessy on the way;) That's a win-win situation;)
thanks mate for a glorious solution!
oh! one more question... as far as i understood the steal wool has to be deeper in the neck, with no bits left outside? Then when applying dmt - the bottle should not be vertical (neck up)? One should gently put the dmt into the neck, then heat a bit? And about the lighter - is a standard zippo enough as a heat source when smoking it afterward, or a blow-torch like lighter of some sort is a better solution?
thanks again
-
you can find a tutorial with pictures, try google, i dont have the link handly.
-
Last time i built a machine, i used a screwdriver to make the hole. Probably not the best thing but it worked for me.
Also, i highly recommend that you guys burn the steel wool before putting it inside the machine. Some time ago, My friends and I were trying out my friends new machine, and he didn't burn the steel wool before putting it in (I never used to either until that day). My friend made the mistake of touching the steel wool with the flame. while hitting dimitri.. The steel wool ended up catching on fire, and around his second of third hit, the hennessy bottle blew up!
He had a blast, but it was sort of a bummer because we lost a nice machine and the rest of us had to hit the deemster with a weed pipe... The last two i have made, i made sure i burned the the steel wool to get rid of the stuff that catches on fire just in case the flame touches the wool. I had never had that problem before because I didn't touch the flame to the steel wool, but i guess my friend did that time and it caught fire.
I just wanted to let you guys know that it is possible for the machine to blow up in your face if you don't make it properly. Also if you don't burn the steel wool, DO NOT touch the flame to it, it will catch fire!
good luck :)
I edited my original post because i am wasted, and it the first one did not make sense. anyways, peace out <3
-
;)
-
This works:
- Get stainless steel wool - the shiny spirally type.
- Cut some off with scissors - a 1cm chunk is enough
- Flame it for a few seconds to burn off any machine oil, etc
- Shove the wool into the neck of the bottle.
- Place carefully measured dose of DMT onto the wool
- Find somewhere very comfy to sit
- Make sure you've got a place to put the hot pipe before you go into hyperspace - or an experienced sitter can help you.
- Heat up the steel wool through the neck of the bottle. The DMT will melt. Melt as much as you can see.
- Keeping the flame at the opening of the bottle, take your hit. Keep the flame at a distance to avoid contact with the DMT or you'll burn it.
- Breathe. Take another hit. And another if you can.
- 15 secs until launch...
... and remember to smile - it keeps the positive vibe up while you're there
-
:D
-
Me again, just, you know, coz I'm like that;)
Last time i built a machine, i used a screwdriver to make the hole. Probably not the best thing but it worked for me.
I have thought about this too - thought 2 options, one - to take a x or * shaped screwdriver and jut to manually grind my way through, the other thought was to use a hammer - just bit afraid of this method, thought it could simply brake the bottle?
Thanks about warning to burn the wool first - will do that;)
-
Glass vapor genie for the win.
-
you can find a tutorial with pictures, try google, i dont have the link handly.
I posted the PDF link above. The tutorial with photos is in the "DMT Handbook."
-
personally I would just like a €10-€30 buck option to buy. Nothing fancy. But for the non-Mcgyver type with money...that is me.
Yes, someone do it for me. I pay.